PeugeotClub Slovakia - Les Fans De Lion o.z.
Hlavné fóra => Servis => Peugeot 508 I => Téma založená: TomasARN 20.04.2018 - 20:16:47
-
Potreboval by som radu. Prestalo fungovat stropne LED osvetlenie, predne aj zadne a kozmeticke zrkadla. Vylucovacou metodou som zistil, ze nejde do stropneho svetla kostra, lebo ak privediem napriklad do kozmetickeho zrkadla kostru, tak potom vsetko funguje. Napada vas kde by mohol byt problem?
-
Nefunguje ti po otvorení dverí, alebo sa nedá zapnúť ani vypínačom na svetle?
-
vobec neslo, ani zapnut a ani pri otvoreni dveri, ani predne stropne, ani zadne, ani svetlo v slnecnej clone. Jedine co fungovalo bol ovladac clony panoramatickej strechy. Problem nastal pri vymene 1,2W ziaroviek vo svetle v slnecnej clone, po vlozeni led odisla poistka, bola nahradena novou, potom LED svietila, ale nakolko tam slabo drzala, vypol som zapalovnie, dal naspät klasicku ziarovku co tam bola a uz nic neslo. Nenasiel som pricinu, ale zaplatal som to tak, ze do konektoru, ktory ide do predneho stropneho svetla na PIN 10, kde je zlto zeleny kabel som pripojil dalsi kabel, ktory som zobral s pod volantu, tiez zlto zeleny (kostra) a uz vsetko funguje tak ako ma
-
Skusal uz niekto reboot BSI ? Vraj ked je najaky problem, napriklad aj s osvetlenim, je dobre spravit reboot
http://www.petercoopercarrepairs.co.uk/peugeot_bsi_reboot_procedure.htm
Some of you will have already come across a strange problem when programming
keys on 2002 onwards Bsi equipped Peugeot. This usually presents
itself as a complete instrument cluster failure after the keys have
been programmed when the customer comes to collect the car.
BSI Unit
The BSI unit is basically a computer which
handles a multitude of functions such as
odometer value, central locking, lights and
immobiliser. Some later Bsi units are liable
to corrupt their own software program if
not “woken up” in a specific way after
programming keys or battery disconnection.
The details of this are explored
thoroughly in a Peugeot TSB but I will
summarise for you briefly.
Procedure for Initialising the BSI after key learning
1. Disconnect the diagnostic tool.
2. Put the driver’s window down, lift the bonnet and ensure all
equipment is switched off.
3. Ensure all doors are closed and remove key from the
ignition.
4. Wait for 3 minutes, disconnect the vehicle battery and wait
15 seconds.
5. Reconnect the vehicle battery, wait a further 10 seconds (do
not open doors.)
6. Switch on the side lights through the driver's window.
7. Switch on the ignition and check system’s functionality.
8. Hold lock button on key down for 10 seconds.
9.remove key open & close door test central locking system
10. Start the engine and complete the system’s check.
Failure to follow this procedure could result in incorrect operation of many
BSI related items.
It did take three attempts following this procedure before it worked.
-
Kludne sprav. Ja som to robil x-krát na rôznych autách... ;)
https://forum.peugeotclubslovakia.sk/index.php/topic,3933.msg61963.html#msg61963
-
Dik, skusim to. Teraz som robil celkovu diagnostiku vozidla s diagnostikou Launch x431 pro a vsetko bolo negativne
-
Zdravim, mam podobny problem. Pomohol restart BSI?
-
Chalani vyriesili ste to nejako inak ako prepajanim dalsich kablov?